Our sliding doors are made from premium quality aluminium and using the latest technology offer super smooth and quiet gliding doors. We custom manufacture doors to fit door openings of up to 2400mm high and 3600mm wide.

Depending on the size of the opening, you have the option of double or triple tracks. Sliding doors are designed to slightly overlap each other to provide a seamless look at the same time as concealing your wardrobe interior.

We manufacture two styles of sliding doors, Metro Series and Ultra Series. Metro Series doors have a slim frame, our classic easy-glide wheel system, and each door can be made up to 2.1m high x 0.9m wide. Ultra Series doors are our premium door option which have a thick frame, an internal wheel system for super smooth gliding, and each door can be made up to 2.4m high x 1.2m wide. Both styles boast Aluminium frames and tracks which are available in white or silver, and offer mirror and white melamine panel combinations.

Most custom made wardrobe doors are in pairs/sets and we would recommend this setup for small to medium openings. Door openings between 1000mm and 1800mm wide suit our Metro Series doors, or between 1000mm and 2400mm wide suit our Ultra Series doors. A 2 door track is 80mm deep to sit within your existing door jamb (top track is 80mm deep, bottom track is 60mm deep – set back from the front edge – refer install instructions for position of bottom track). If you have drawers in your wardrobe, you will need to off-set the drawers from the centre so they make clearance of the sliding doors which are manufactured to overlap each other to conceal the wardrobe behind.

For medium to large door openings we recommend 3 doors on 3 tracks for better access to drawers and shelves. Door openings between 1500mm and 2700mm wide suit our Metro Series doors, or between 1500mm and 3600mm wide suit our Ultra Series doors.
A 3 door track system is 120mm deep to sit within your existing door jamb (top track is 120mm deep, bottom track is 100mm deep – set back from the front edge – refer install instructions for position of bottom track). This is often the best option for wardrobes that have drawer systems inside, as each door runs in it’s own track, meaning all 3 doors can be stacked to the hard left or hard right for greater access at any one time. If you have drawers in your wardrobe, you will need to ensure the drawers make clearance of the door opening as sliding doors are manufactured to overlap each other to conceal the wardrobe behind.

For large door openings, or for wardrobes where a triple track (120mm) is too deep to house, we recommend 4 doors on 2 tracks. Suited for door openings between 2000mm wide and 3600mm wide. Quad doors give you good access to your wardrobe system behind, accessing nearly 50% of your wardrobe space at any one time. Two doors run on the front track, and two doors on the back track, meaning you can move all four doors to access the various areas of your wardrobe behind – especially suitable for wardrobes with drawer systems. A 2 door track system is 80mm deep to sit within your existing door jamb. If you have drawers in your wardrobe, you will need to ensure the drawers make clearance of the door opening as sliding doors are manufactured to overlap each other to conceal the wardrobe behind.

Sliding Doors rely on a hard and level surface for smooth operation. If the floor surface is not level where a door track will be applied, you will need to prepare the surface to be level prior to providing your final measurement. If a floor packer is required for the bottom door track, we will supply a 10mm floor packer free of charge. The packer can only be used on a hard surface where carpet will be applied. Cutting existing carpet is the responsibility of the customer or a professional. Bottom tracks cannot be installed on top of carpet.